Vacuum Cooler Fact Sheet
Vacuum cooling is a non-conventional, and innovative cooling process, that has been introduced to the horticulture sector to decrease the amount of time it takes to remove field heat from the products after harvesting. By rapidly removing the field heat from our products, it has been shown we are able to extend the shelf life of our products, and significantly improve the products quality. After harvesting, fresh cut flowers undergo physiological changes causing deterioration almost instantly. The field heat in the products can increase the rate of those changes causing rapid deterioration and premature breakdown, drastically effecting the products shelf life. Therefore, it is imperative we remove the heat, and cool the product, as quickly as possible.  Conventional cooling can take anywhere from 12-20 hours, in which time the product continues to deteriorate. Vacuum cooling decreases that time significantly, and can bring the flowers down to their desired temperature in only 15 minutes, almost halting the deterioration process, and decelerating the rate of the physiological changes. Removing the field heat quickly is very effective in prolonging the shelf life of our flowers. Furthermore, unlike conventional cooling which takes place through the process of temperature exchange between the product and the surrounding atmosphere causing condensation (especially on sleeved and packaged floral products), the vacuum cooling process produces limited to no condensation on our products, preventing any Botrytis, or molding, further increasing the quality of our products.

Vacuum Cooling: How it works
In an atmospheric pressure of 1 atm, water will boil and evaporate at 100 degrees Celsius. The lower the atmospheric pressure, the lower the temperate required. In a vacuum cooler the atmospheric pressure is about 1/10th which gives water a boiling point at 0 degrees. When our products are put in the vacuum cooler and the pressure is dropped to this point, the water in the cells of the plant begin to boil/vaporise and essentially draw the heat energy out with it, consequently cooling the product. This water evaporation can take place on the surface and within the product, providing uniform temperature distribution, as opposed to conventional cooling processes where the product cools from the outside, inward. We are able to quickly cool entire pallets of packaged product prior to cool storage or shipping, guaranteeing that the product throughout the pallet is all the same temperature. Furthermore, precise temperature control is possible with this vacuum cooling method.

Summary Fact Sheet

Grower of the Month! Posted on Feb 20, 2015

We were honoured to be featured in the Flowers Canada: Grower of the Month article. Please view the attached link to read our story. http://www.flowerscanadagrowers.com/flower-growers/directory/grower/ontario/dutch-mill-gardens-inc

Windmills Have Arrived! Posted on May 30, 2014

We are excited to announce the arrival and installation of our new windmills. These windmills will help to ensure the growth and health of our products in the field. They will safeguard our products by ensuring they are receiving the heat units they need and protecting them from frost in the later months of our season.

Innovative Cooling Technology